Skip to main content

How to disable Firefox "Open in new window" context menu item

I can't remember how many times I have accidentally clicked on "Open in New Window" when I meant to select "Open in new tab" when using Firefox. Finally irritated me enough to find a solution.

Locate C:\Documents and Settings\<username>\ Application Data\Mozilla\Firefox\Profiles. There should be two files: userChrome-example.css and userContent-example.css. Copy userChrome-example.css to a new file called userchrome.css and open it in a text editor.

Add the following lines to the end of the file:

/* Never show “Open in New Window” when right clicking */
#context-openlink {display: none !important;}


I also added this block to remove "Open in New Private Window":

/* Never show "Open in New Private Window" when right clicking */
#context-openlinkprivate { display: none !important; }




Now my Firefox context menu shows only "Open Link in New Tab":


Great!

Comments

  1. I don’t understand half of what is being said on these answers, I am no techie I want completely off this site Help

    ReplyDelete
  2. understand half of what is

    ReplyDelete

Post a Comment

Popular posts from this blog

Update: Line adapter for Ozito Blade Trimmer

Update (Dec 2021): If you access to a 3D printer, I would now recommend this solution , which makes it super easy to replace the trimmer line. I have been using it for a few months now with zero issue.

Filament Joiner Part 2 (With Display and Knob)

Thanks to the current corona-virus crisis, the parts I ordered for the filament joiner project were taking forever to arrive. But now that they have finally arrived, I can put them to good use. These were the parts ordered: 0.96" OLED display SSD1306 Rotary switch encoder KY-040 Here is the final circuit diagram: The OLED display is connected to the SCK and SDA pins of the Nano (A2 and A3 respectively), and powered by 5V and GND. The rotary switch encoder is connected as follows: VCC => 5V GND = > GND CLK => D9 DT => D8 SW => D2 My prototype board now looks like this: The updated code for driving the knob and display is available in  heater-with-display.ino in the Github repository . We now have a fairly compact (about 7cm x 5cm) and independent filament joiner (no need to connect to PC) that is driven solely by a 12V power supply. Here's how to use it to join printer filaments. More usage details in my previous post .

Adding "Stereo Mixer" to Windows 7 with Conexant sound card

This procedure worked for my laptop (Thinkpad E530) with a Conexant 20671 sound card, but I suspect it will work for other sound cards in the Conexant family. I was playing with CamStudio to do a video capture of a Flash-based cartoon so that I can put it on the WDTV media player and play it on the big screen in the living room for my kids. The video capture worked brilliantly, but to do a sound capture, I needed to do some hacking. Apparently, there was this recording device called "Stereo Mixer" that was pretty standard in the Windows XP days. This allowed you to capture whatever was played to the speaker in all its digital glory. Then under pressure from various organizations on the dark side of the force, Microsoft and soundcard makers starting disabling this wonderful feature from Windows Vista onwards. So after much Googling around, I found out that for most sound cards, the hardware feature is still there, just not enabled on the software side. Unfortunately, to